0.04-4m/L Alcohol Sensor Shell Intelligent Fire MP-3 Alcohol Testing Alcohol Sensor Modules

1, the heating voltage: 24V ± 0.2V (AC · DC)2, Working current: 150mA3, loop voltage: ≤DC15V (maximum DC15V)4, the output voltage: Default 0-10V (resistance than the corresponding concentration of output) selectable 0-5V4, load resistance: 1K (adjustable)5, Detectable concentration range: 0.04-4mg/L (alcohol)6. Clean the air Voltage: ≤1.5V7. Sensitivity: ≥3%8. Response time: ≤1S (preheat 3-5 minutes)9, Response time: ≤30S10. Component Power: ≤1W11, the working temperature: -10 ~ 50 oC (nominal temperature 20 oC)12, Humidity: 95% RH (nominal humidity 65% RH)13, size: 65mm X 45mm X 40mm14, weight size: 40gSuitable for families, factories, underground workshops, mines and other alcohol leak detection, and more for the environment alcohol testing control equipment, alarm monitoring devices※ The output is non-linear, only take a value in the range of 0-10V. Because the sensor is a semiconductor sensor, The sensor will output approximately 1-3V when no gas is detected, as the actual output to prevail.

• 1, with analog signal output;
• 2, the output signal range can be adjusted, optional 0-10V (default), the output signal can be connected to PLC, etc;
• 3, corresponding analog output voltage changes, the higher the concentration, the higher the voltage;
• 4, Alcohol has a good environmental sensitivity;
• 5, with a rapid response recovery characteristics