Cannon ZCAXC-RO-2 Zeitfuchs Cross-Arm Unity Factor Calibrated Viscometer With Found Holder, 2.0 to 10 Centistokes Viscosity Range, Size 2

The Cannon ZCAXC-RO-2 Zeitfuchs cross-arm unity factor viscometer has a permanently attached 51mm diameter round metal holder and a 2.0 to 10 centistokes (cSt) viscosity measuring range and is suitable for the measurement of either transparent or opaque Newtonian fluids such as fuels and lubricants. It uses a viscometer constant of 0.01 centistokes per second (cSt/s) with 0.2 percent accuracy for calculating kinematic viscosity of sample sizes as small as 1.0mL. The ZCAXC-RO-series size 2 viscometer uses a 230mm depth water bath (not included) for temperature-control testing and a vacuum (not included) to draw a sample up for timed testing between two sets of printed marks. It includes an ASTM International certificate of calibration. This calibrated capillary-style viscometer meets the ASTM International D446 standard for viscometers and the D445 standard for testing viscosity.A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and development, process control, and plant quality control applications. Some viscometers are manufactured to meet industry or governmental standards, including Ingress Protection (IP), National Institute of Standards and Technology (NIST), International Standards Organization (ISO), and ASTM International (formerly American Society for Testing and Materials)CANNON Instrument Company manufacturers viscosity measurement products, including custom viscosity/density standards, and provides testing and certification of samples. The company, founded in 1938 and located in State College, PA, is a National Institute of Standards and Technology delegate for provision of U.S. national standards for viscosity measurement.What's in the Box?ZCAXC-RO-2 calibrated viscometerCalibration certificateInstructions

• ZCAXC-RO-series cross-arm unity factor viscometer with holder for measurement of kinematic viscosity of either transparent or opaque Newtonian fluid in the 2.0 to 10 centistokes (cSt) viscosity range
• Uses viscometer constant of 0.01 centistokes per second (cSt/s) for calculating viscosity, 0.2 percent accuracy
• Uses vacuum (not included) to draw sample up for timed testing between two sets of printed marks
• Uses 230mm depth water bath (not included) for temperature-controlled testing
• Meets ASTM D446 standard for viscometers and ASTM D445 standard for testing viscosity of fluids such as fuels and lubricants