for ELPLP68 Projector Lamp with Housing for 3020 3010 3010E 3020E Economy

We Promise: 30 days refund and 180 days replacement. How to replace the lamp: 1.Turn on the projector and unplug the power cord. 2.Wait one hour to allow it to cool thoroughly.(Caution: Do not remove the lamp unit from the projector right after use. The lamp will be hot and may cause burn injury.) 3.Turn the projector over. Open the lamp unit cover by loosening the screws with screwdriver. 4.Loosen the securing screws on the lamp with screwdriver. Hold the lamp unit well and put it out from the direction of the arrow. 5.Insert the new lamp until it’s securely in place. Tighten the screws. Fold the handle. 6.Connect the lamp connector and tighten the screws. 7.Close the lamp cover and tighten the screws. 8.Reset the Projector by following the Projector Operating Manual. How can I contact Seller: Click Orders in in the upper-right corner, find your order in the list, and click Get help with order. How can I get a refund: 1.Go to Your Orders. 2.Locate your order in the list and click Problem with order. 3.Select your problem from the list. 4.Select Request refund. 5.Enter your comments in the text box. 6.Select Submit. Compatible model: EH-TW5900 EH-TW5910 EH-TW6000 EH-TW6000W EH-TW6100 EH-TW6100W H421A H450A PowerLite HC 3010 PowerLite HC 3010e PowerLite HC 3020 PowerLite HC 3020e

• Part Number :ELPLP68
• Compatible models: ( Use CTRL/Command+F to Quickly Sort your Model )
• EH-TW5900 EH-TW5910 EH-TW6000 EH-TW6000W EH-TW6100 EH-TW6100W H421A H450A PowerLite HC 3010 PowerLite HC 3010e PowerLite HC 3020 PowerLite HC 3020e
• We promise: 30 days refund and 180 days replacement
• Do not hesitate to contact us if there is any question