waveshare 3.5 inch IPS Touch Screen TFT LCD Display B 480x320 Resolution Resistive Touchscreen LCD Module for Raspberry Pi 3 B/3 B+/2 B/B+/3 A+/A+

★★★★★ 4.6 104 Bewertungen

€14.80
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Verkauft und versendet von mail.internetslayers.com
Wir bemühen uns, Ihnen genaue Produktinformationen anzuzeigen. Hersteller, Lieferanten und andere stellen die hier gezeigten Angaben bereit.
€14.80
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Wie möchten Sie Ihren Artikel erhalten?
Die ersten 30 Tage sind kostenlos! Wählen Sie den Tarif an der Kasse.
Versand
Ankunft 11.10.
Kostenlos
Abholung
In der Nähe prüfen
Lieferung
Nicht verfügbar

Verkauft und versendet von mail.internetslayers.com
30 Tage kostenlose Rückgabe Details

Produktdetails

Artikelnummer 209105269 Erscheinungsdatum 2026/03/29 Listenpreis €14.80 Modellnummer 209105269
Kategorie

Features480x320 hardware resolutionResistive touch controlSupports any revision of Raspberry Pi (directly-pluggable)Drivers provided (works with your own Raspbian/Ubuntu/Kali)Supports FBCP software driver as well, allows to config software resolution and set up dual-displayIPS technology, high quality and perfect displaying from very wide viewing angleSize perfectly fits the Pi (Raspberry Pi B+/2B/3B/3B+)High quality immersion gold surface platingCombined with the Raspberry Pi, allows you to:Take photos by touching (up to 17 camera modes)Use software keyboard (system interaction without keyboard/mouse)Key ParametersLCD Type: IPSLCD Interface: SPITouch Screen Type: ResistiveTouch Screen Controller: XPT2046Colors: 65536Backlight: LEDResolution:320*480(Pixel) Aspect Ratio: 8:5Power Consumption: TBDBacklight Current: TBDOperating Temp. (Degree): TBDPackage Content 3.5inch RPi LCD (B) x 1 Touch pen x 1 RPi screws pack (2pcs) x 1 Quick start sheet x1 Why the LCD still doesn't work with the Waveshare provided image?Make sure the hardware connection is correct and connects fine.Make sure the image in TF card is burnt correctly.The PWR will keep on and the ACT will keep blinking when the Raspberry Pi starts up successfully, in case both of the two LEDs keep on, it is possible that the image was burnt incorrectly OR the TF card was in bad contact.Note:100% original from Waveshare, technical support is provided ,please feel free to contact us !

  • 3.5 inch TFT touch screen with 480x320 hardware resolution, supports any revision of Raspberry Pi (directly-pluggable)
  • Drivers provided (works with your own Raspbian/Ubuntu/Kali),Supports FBCP software driver as well, allows to config software resolution and set up dual-display
  • IPS display, high quality and perfect displaying from very wide viewing angle,Size perfectly fits the Pi (Raspberry Pi B+/2B/3B/3B+)
  • High quality immersion gold surface plating
  • Combined with the Raspberry Pi, allows you to:Take photos by touching (up to 17 camera modes),Use software keyboard (system interaction without keyboard/mouse)
UPC 614591448402
Brand waveshare
Item Weight 1.76 ounces
Screen Size 3.5 Inches
Display Type LCD, LED
Manufacturer Waveshare
Model Number 3.5inch RPI TFT LCD (B)
Mounting Type Wall Mount
Screen Finish Glossy
Viewing Angle 178 Degrees
Native Resolution 480x320
Display Technology LCD
Additional Features Touchscreen
Total Number of HDMI Ports 1

Korrektur der Produktinformationen

Wenn Sie Unvollständigkeiten oder Fehler in den Produktinformationen auf dieser Seite bemerken, nutzen Sie bitte das Korrekturformular unten.

Korrekturanfrage

Kundenbewertungen

4.6 von 5
★★★★★
104 Bewertungen | 43 Rezensionen
So wird die Artikelbewertung berechnet
Alle Bewertungen anzeigen
5 Sterne
84% (87)
4 Sterne
3% (3)
3 Sterne
2% (2)
2 Sterne
1% (1)
1 Stern
10% (10)
Sortieren nach

Für dieses Produkt liegen derzeit keine schriftlichen Bewertungen vor.